URANOS NX 2200 SMC

The URANOS NX 2200 SMC ist the perfect welding power source for simple, reliable and modern wire fed welding. It is particularly suited to the continuous processes typical of light metal fabrication, shipbuilding, car repairand mechanical workshops in general.

MIG/MAG - MMA
Single-phase 1x230V
greenWave^®inverter technology
Built-in wire feeder unit
Welding programs (SMART)

Customer like it because:

Documents

Data Sheet

General
Welding processs	MIG/MAG - MMA - TIG DC Lift
Materials	Carbon steels - Stainless Steels - Aluminum
Dimensions	620x270x460mm
Weight	22.4 kg
Power supply
Voltage (50/60 Hz)	1x230V±15%
Maximum input power	6.4 kVA
Maximum input current	28.2 A
Power factor PF	0.99
Efficiency	86 %
Slow blow line fuse	25 A
Open circuit voltage	92Vdc
IP protection rate	IP23S
Insulation class	H
Power supply cable	3x2.5mm² - 2 m
Welding
Adjustment range	3A-220A
Duty cycle MIG/MAG - 40 °C	35% - 220A 60% - 190A 100% - 180A
Duty cycle MIG/MAG - 25 °C	100% - 220A
Ø Wire diameter	0.8 -1.0 mm (opz. 0.6-1.6)
Ø Fluxcoredwire	0.9 -1.6 mm
Ø Aluminumwire	0.8 -1.6 mm
Wire speed	0.5 - 22.0 m/min
N° rolls	4
Wire spool diameter	Ø 200/300mm
Remote Control compatible	yes

	2200 Classic	2200 Smart
Welding programs	-	16
Push Pull torch compatible	yes	yes

Applications
- Light job shop fabrication
- Building sites
- Shipyards
- Automobile industry
- Railway industry
- Repair and overhaul
- Workshops
- Sheet metal working
Technicalities
- "greenWave" inverter technology for high energy efficiency and
  perfect control over all welding phases
- Heavy duty and enviromental conditions, high service life
- CAN fieldbus digital communication protocol system (very high speed
  and high reliability digital communication)
- Software based controls can be upgraded as new features become
  available
- High temperature, shockproof, abrasion resistant plastic case
- Air flow ducting and fully encapsulated PC board to avoid dust
  contamination
- Linear controlled fan on demand
- Energy-saving inverter technology (built-in P.F.C. - power factor
  controller)
- Built-in wire feeder unit (4 Roll drives)
- Wire drive unit fully designed by voestalpine Böhler Welding
- Ø 200/300 mm wire spool compatible
- Welding polarity switch device
- Full digital and user-friendly control panel
- Welding parameters digital display
- Last job settings auto-storage at switch-off
- Back-up/Restore automatic
- Lock-unlock function key protected by password
- Complete management of multiple systems on Ethernet
- Software for supervision and full parameter setting of welding
  operations
- Ideal for stick welding with multiple types of popular electrodes
- Built-in adjustable arc control features (hot start, arc force,
  antisticking)
- Synergic setting for optimal stick welding with multiple types of
  electrodes
- Reduced electromagnetic interference with lift start TIG welding
- 2/4 step operating mode
- Arc dynamic adjustment
- Perfect arc ignition (soft start - motor slope)
- Burn-back and droplet detachment correction
- Synergic operations from databank (16 pre-set programs) (URANOS
  NX 2200 SMC Smart)
- Wire speed (0,5-22,0 m/min)
- Spot welding mode
- Intermittent welding mode
- Bilevel MIG/MAG (URANOS NX 2200 SMC Smart)
- Remote control compatible
- WU cooling unit compatible
- Controlled cooling operations
Photo Gallery