reset BS-OT BS-UT HS-UT KS-OT O-KS Pull cam R-BS-OT R-KS-OT reset 48 50 60 65 70 80 85 90 100 110 125 130 150 160 170 175 180 220 260 280 300 330 350 370 400 420 430 440 450 500 555 600 620 640 650 680 700 720 730 760 770 780 790 794 800 910 920 1000 1030 1050 1100 1200 1260 1400 1600 1630 1750 2000 2030 reset -10 -5 -3 0 5 7 10 12 15 17 19 20 25 30 33 35 40 43 45 50 55 58 60 63 65 70 75 76 80 85 87 reset - -310 -210 -190 -185 -184 -175 -152 -140 -133 -130 -120 -105 -100 -90 -85 -80 -75 -70 -65 -60 -50 -47,5 -40 -30 -25 -20 -10 0 10 20 23 25 30 35 40 45 50 55 60 65 70 77 80 90 95 100 110 112 115 130 150 160 180 285 reset - -250 -235 -220 -200 -162 -150 -145 -125 -120 -100 -95 -85 -80 -70 -60 -50 -45 -40 -30 -16 -10 -5 0 15 20 21 24 30 35 39,5 40 45 49 50 52 55 60 70 80 85 90 100 110 120 140 145 150 155 165 175 190 210 reset 95mm stroke; Cam slider, Cam unit bed and adapted Angle change Angle change, Driver offset, Cam slider widened from 600 to 780mm according to customer requirements, Cam unit bed modified Angle change, driver offset, work surface enlarged Angle changed, Cam unit bed adapted Angle changed, Driver offset, Cam slider element widened from 1000 to 1030mm according to customer requirements: Cam slider, Cam unit bed and adapted, only 1x special driver (instead of 2x) Angle changed, Work surface enlarged by 40mm, Driver and Cam slider adapted Angle changed; Driver and Cam unit bed and adapted Angle changed; Driver, Cam slider, Cam unit bed and adapted Cam slider according to customer requirements (asymmetrical), slider bed extended Cam slider according to customer requirements, slider bed extended Cam slider and Cam unit bed asymmetrical Cam slider element widened from 1000 to 1100mm, Cam slider adapted Cam slider element widened from 700 to 780mm, Cam slider adapted Cam slider element widened from 700 to 790mm, work surface shortened by 15mm, Slider bed stop surface machined Cam slider element widened from 700 to 800mm, Cam slider adapted Cam unit bed and screw connection at the front changed according to customer request Cam unit bed shorter, work surface widened Driver offset Driver offset and shortened, workspace widened and adjusted and side mounting tabs Driver offset, asymmetrical and increased work surface according to customer requirements, Cam slider, Cam unit bed and adapted Driver offset, asymmetrical work surface extended by 40mm according to customer requirements, Cam slider and Cam unit bed adapted Driver offset, Cam slider according to customer requirements, Cam unit bed 25mm lower Driver offset, Cam slider according to customer requirements, Cam unit bed adapted Driver offset, Cam slider according to customer requirements, Cam unit bed screw connection at the front changed Driver offset, Cam slider adapted Driver offset, Cam slider widened from 1400 to 1600mm according to customer requirements, Cam unit bed 10mm lower Driver offset, Cam slider widened from 1400 to 1600mm according to customer requirements, Cam unit bed 25mm lower Driver offset, Cam slider widened from 1600 to 1630mm according to customer requirements, Cam unit bed 10mm lower Driver offset, Cam slider widened from 1600 to 1750mm according to customer requirements, Cam unit bed 27mm lower Driver offset, Cam slider widened from 1600 to 2000mm according to customer requirements, Cam unit bed 27mm lower Driver offset, Cam slider widened from 1600 to 2030mm according to customer requirements, Cam unit bed 27mm lower Driver offset, Cam slider widened from 600 to 650mm according to customer requirements Driver offset, Cam slider widened from 700 to 800mm according to customer requirements and adapted Driver offset, Cam slider widened from 850 to 920mm and Work surface extended by 155mm according to customer requirements; Cam slider and Cam unit bed adapted Driver offset, raised and widened work surface to 760mm according to customer requirements, Cam slider, Cam unit bed and adapted Driver offset, slider bed shortened and Cam slider adapted Driver offset, special slider part according to customer specification; Cam slider changed ,slider bed and screw connection (lugs) changed according to customer specification Driver offset, work surface enlarged Driver offset, Work surface extended by 115mm, Cam slider, Cam unit bed and adapted Driver offset, Work surface extended by 140mm, Driver and Cam slider adapted Driver offset, Work surface extended by 145mm according to customer requirements (asymmetrical), Cam slider, Cam unit bed and adapted Driver offset, Work surface extended by 180mm according to customer requirements, Cam slider and Cam unit bed adapted Driver offset, Work surface extended by 190mm, Cam slider, Cam unit bed and adapted Driver offset, Work surface extended by 25mm according to customer requirements, Cam slider, Cam unit bed and adapted Driver offset; 30mm raised and 50mm extended work surface; Cam slider, Cam unit bed and adapted Driver offset; Driver, Cam slider and Cam unit bed adapted Driver offset; extended by 70mm work surface(asymmetrical); Cam slider, Cam unit bed and adapted Driver offset; raised work surface extended by 185mm (asymmetrical); Cam slider, Cam unit bed and adapted Driver shortened and side mounting tabs Forced retractor extended; Driver adapted Massive driver offset, Cam slider according to customer requirements Mounting plate 50mm thicker and 20mm wider Mounting plate increased by 35mm Mounting plate increased by 35mm, 50mm thicker and 50mm wider Mounting plate increased by 50mm and 50mm thicker slide stroke shortened to 22mm and narrower; Slider bed and driver shortened, slider part adapted Slide stroke to 140mm, Cam slider and Cam unit bed adapted Slider part and slider bed extended to the front according to customer requirements (asymmetrical), Cam slider, Cam unit bed and adapted Special cam unit Special Die mount cam according to customer requirements, 4x Cams and 1x Driver Stroke extended to 100mm; Cam unit bed adapted Stroke extended to 100mm; Driver, Cam slider and Cam unit bed adapted Stroke extended to 105mm; Driver, Cam slider and Cam unit bed adapted Stroke extended to 110mm; Driver, Cam slider and Cam unit bed adapted Stroke extended to 115mm; Driver, Cam slider and Cam unit bed adapted Stroke extended to 140mm; Driver, Cam slider and Cam unit bed adapted Stroke extended to 70mm; Driver, Cam slider and Cam unit bed adapted Stroke extended to 80mm; Driver, Cam slider and Cam unit bed adapted Stroke extended to 85mm; Driver, Cam slider and Cam unit bed adapted Stroke extended to 90mm; Cam slider and Cam unit bed adapted Stroke extended to 90mm; Driver, Cam slider and Cam unit bed adapted Stroke extended to 90mm; Driver, Cam slider, Cam unit bed and adapted Stroke extended to 95mm; Cam slider and Cam unit bed adapted Stroke shortened to 40mm and narrower; Driver, Cam slider and Cam unit bed adapted stroke shortened to 40mm; Cam unit bed and driver shortened, Cam slider adapted stroke shortened to 45mm , no Driver Treiber -30mm horizontal und -80mm vertikal Treiber 150 nach hinten,100 nach unten versetzt Treiber massiv versetzen Treiber massiv versetzt Treiber versetzen Treiber versetzen, Anarbeitung gez/gesp Treiber versetzten Work surface according to customer requirements Work surface according to customer requirements, Cam slider adapted Work surface according to customer requirements, only 1x special driver (instead of 2x); Slider bed and slider part adapted work surface enlarged work surface enlarged by 270mm work surface enlarged by 85mm Work surface extended by 50mm, Treiber versetzt; Driver offset, Cam slider, Cam unit bed and adapted work surface extended by 94mm and widened by 524mm according to customer request (asymmetrical), Cam slider and Cam unit bed adapted Work surface increased by 20mm; ohne Montageplatte Work surface increased, Cam slider, Cam unit bed and adapted work surface widened by 650mm, Driver offset Work surface widened/extended from 850 to 910mm and Cam unit bed shortened according to customer requirements Working angle changed, working surface widened from 220 to 280; driver, Cam slider and Cam unit bed shortened and adapted Working surface +30mm, slider bed extended, working angle 12 degrees, 95mm stroke Working surface increased by 60.5mm; Driver and Cam slider adapted 
