UTP products and solution competence convince once again

Viraj Profile is one of the world‘s largest manufacturers of stainless steel flanges with one of the largest forging facilities. The forge includes #10 hammers (1.6 T to 16.0 T capacity) and #2 presses with a capacity of up to 4000 T.

On the 4000 tonne forging press, a challenge occurred when one of the pinions broke and became wedged in the gear assembly where it damaged another 13 teeth of the 3.9 m diameter gear. Of the total 137 teeth, 13 were completely damaged and 17 partially damaged. This damage was a severe blow to production with a good order backlog from Europe. Replacing the gear of the 13.8 t press would have cost €110,000 and taken 7 - 8 months. The production loss for this press was about 20 to 25 t/day.

The goal was to complete this task economically and within 30 days. The „Viraj Forging“ team for mechanical maintenance and the colleagues in production had to be convinced with the best solution.

The SMAW method was used for controlled heat input. A balanced ratio of 3.2 mm and 4.0 mm electrodes was used for good fusion with the base material and productivity.

UTP 068 HH can be used for repair welding on difficult to form steels such as heat treatable steels or tool steels. In addition, mixed joints of austenitic and ferritic materials can be welded at elevated operating temperatures. The weld metal of UTP 068 HH / UTP 7015 is hot crack resistant, does not tend to embrittlement and is scale resistant at high
temperatures.

UTP 65 D has been developed to meet the highest requirements for joining and surfacing. It is extremely crack resistant when joining difficult-to-weld steels, such as hard manganese steels, tool steels, spring steels, high-speed steels as well as in mixed joints.

The thick coated Anfas stick electrode UTP N 890 AS can be used on all types of steel with ferritic and austenitic microstructure as well as on cast iron, cast steel and all nonferrous metals. It enables the cutting out of workpieces in a very simple way. UTP N 890 AS is also suitable for removing corroded metal layers and for fusion cutting of metallic materials.

Extensive benefits package leads to customer loyalty. The UTP experts were able to find a cost-effective solution for the repair, and the customer was completely satisfied thanks to the considerable time saving of seven months in the procurement of a new gear. The absolute dimensional accuracy was of course maintained at full operating load. Due to the convincing solution orientation and the satisfaction of the customer, it resulted, according to the feedback of the UTP experts, „that we use about 700 - 1000 kg of M&R
products for other various repair works every month“.