Laminati e preformati per brasatura in lega d’argento e rame fosforo. I nostri laminati per brasatura in lega d’argento e rame fosforo hanno una superficie di alta qualità con tolleranze di spessore inferiori ai requisiti standard.
L'uso della lamina d'argento per unire i carburi di tungsteno all'acciaio è molto comune. Le leghe contenenti manganese e nichel sono molto utilizzate, soprattutto per le loro proprietà di bagnatura e resistenza meccanica, ad esempio nell'industria delle lame da taglio.
Molti dei nostri clienti stanno utilizzando al meglio il nostro laminato A 338 F, un prodotto contenente nichel e manganese in conformità allo standard ISO 3677. Questo prodotto presenta proprietà comparabili in termini di intervallo di fusione, resistenza e bagnabilità, con un contenuto di argento inferiore. È un'alternativa tecnico economica al prodotto standard A 324 F.
Fontargen Brazing è coinvolta in molti progetti di ricerca e sviluppo in tutto il mondo e collabora con aziende dell'industria degli utensili. Fontargen Brazing offre il supporto tecnico necessario per sviluppare l'ottimizzazione del processo tecnico in collaborazione con il cliente. Utilizziamo le nostre conoscenze per consigliare la scelta del metallo d'apporto perfetto per la brasatura e per supportare gli specialisti della brasatura nell'applicazione ideale.
| Product Name | ISO 17672 | ISO 3677 | AWS 5.8 | Melting range (°C) | Melting range (°F) | Characteristics | Typical applications |
|---|---|---|---|---|---|---|---|
| A 101 F | Cu 773 | B-Cu48ZnNi(Si)-890/920 | RBCuZn-D | 890 - 920 | 1634 - 1688 | for ductile joints and high tensile strength, | Brazing tungsten carbides and high-speed steel, hardening after brazing possible, auger bits, bits for road mills |
| A 210 F | Cu 470a | B-Cu60Zn(Si)-875/895 | 875 - 895 | 1607 - 1643 | widely used for repair purpose | tools for tunneling for examples scraper, agricultural tools | |
| A 205 F | B-Cu86MnNi-970/990 | 970 - 990 | 1778 - 1814 | good wetting at tungsten carbides, high strength in combination with good ductility | carbide tipped drills, coal mining drills, cutter | ||
| A 206 F | B-Cu87MnCo-980/1030 | 980 - 1030 | 1796 - 1886 | good gap filling, heat resisting brazed joints because of Co -contend | mining tools and road drill bits |
| A 101 F | Cu 773 | B-Cu48ZnNi(Si)-890/920 | RBCuZn-D | 890 - 920 | 1634 - 1688 | for ductile joints and high tensile strength, | Brazing tungsten carbides and high-speed steel, hardening after brazing possible, auger bits, bits for road mills |
| A 210 F | Cu 470a | B-Cu60Zn(Si)-875/895 | 875 - 895 | 1607 - 1643 | widely used for repair purpose | tools for tunneling for examples scraper, agricultural tools | |
| A 205 F | B-Cu86MnNi-970/990 | 970 - 990 | 1778 - 1814 | good wetting at tungsten carbides, high strength in combination with good ductility | carbide tipped drills, coal mining drills, cutter | ||
| A 206 F | B-Cu87MnCo-980/1030 | 980 - 1030 | 1796 - 1886 | good gap filling, heat resisting brazed joints because of Co -contend | mining tools and road drill bits |
| Product Name | ISO 17672 | ISO 3677 | AWS 5.8 | Melting range (°C) | Melting range (°F) | Characteristics | Typical applications |
|---|---|---|---|---|---|---|---|
| A 324 F | Ag 230 | B-Ag49ZnCuMnNi-680-705 | BAg-22 | 680 - 705 | 1260 - 1301 | very good wetting and flow at tungsten carbides because of Mn and Ni contend, high strength - τ aB > 200 N/mm2 possible | widely used standard filler metal in brazing tungsten carbides for example conveyor belt scraper, auger bits, crushing teeth, knives |
| A 338 F | B-Ag38CuZnMnNi-680/700 | 680 - 700 | 1265 - 1292 | lower silver contend as A 324 with comparable property's | alternative for A 324 | ||
| A 350 F | Ag 450 | B-Ag50ZnCuNi-660/705 | BAg-24 | 660 - 705 | 1220 - 1305 | very fluid filler metal for close fit up, good wetting at carbides | carbide and diamond tools |
| A 347 F | Ag156 | B-Ag56ZnCuSn-620/655 | BAg-7 | 620 - 655 | 1148 - 1211 | low melting point, medium viscosity | E-motors and generators where high strength and good ductility is necessary |
| A 314 F | Ag 155 | B-Ag55ZnCuSn-630/660 | 630 - 660 | 1166 - 1220 | molten filler metal low viscosity very good flow , low melting point | diamond bits with carbide surface |
| A 324 F | Ag 230 | B-Ag49ZnCuMnNi-680-705 | BAg-22 | 680 - 705 | 1260 - 1301 | very good wetting and flow at tungsten carbides because of Mn and Ni contend, high strength - τ aB > 200 N/mm2 possible | widely used standard filler metal in brazing tungsten carbides for example conveyor belt scraper, auger bits, crushing teeth, knives |
| A 338 F | B-Ag38CuZnMnNi-680/700 | 680 - 700 | 1265 - 1292 | lower silver contend as A 324 with comparable property's | alternative for A 324 | ||
| A 350 F | Ag 450 | B-Ag50ZnCuNi-660/705 | BAg-24 | 660 - 705 | 1220 - 1305 | very fluid filler metal for close fit up, good wetting at carbides | carbide and diamond tools |
| A 347 F | Ag156 | B-Ag56ZnCuSn-620/655 | BAg-7 | 620 - 655 | 1148 - 1211 | low melting point, medium viscosity | E-motors and generators where high strength and good ductility is necessary |
| A 314 F | Ag 155 | B-Ag55ZnCuSn-630/660 | 630 - 660 | 1166 - 1220 | molten filler metal low viscosity very good flow , low melting point | diamond bits with carbide surface | |
| A 356 F | B-Ag63CuInMnNi-730/780 | 680- 705 | 1256 - 1301 | Zn- free alloy, good wetting at tungsten carbides used where zinc fumes in the furnaces not tolerable | for brazed tools which are coated by vacuum process after for example TiN | ||
| A 320 F | Ag 145 | B-Ag45CuZnSn-640/680 | B-Ag-36 | 640-680 | 1184-1256 | medium viscosity, good gap filling | universal brazing alloy - Cu alloys, steel |
| Product Name | ISO 3677 | Melting range (C°) | Melting range (F°) | Characteristics | Typical applications |
|---|---|---|---|---|---|
| A 312 F | B-AgZnCuMnNi-680/705 | 680 -705 | 1260 - 1301 | tri metal foil, widely used, attenuate stress inside the brazed joins | circular saw blades, cutter |
| A 312 F | B-AgZnCuMnNi-680/705 | 680 -705 | 1260 - 1301 | tri metal foil, widely used, attenuate stress inside the brazed joins | circular saw blades, cutter |
| Product Name | ISO 17672 | ISO 3677 | AWS 5.8 | Melting range (°C) | Melting range (°F) | Characteristics | Typical applications |
|---|---|---|---|---|---|---|---|
| A 3015 F | CuP 284 | B-Cu80AgP-645/800 | BCuP-5 | 645 - 800 | 1193 - 1472 | Thin fluid copper-phosphorus alloy with high silver content and high ductility,even at low temperatures | gap brazing of copper and copper |
| A 3015 FS | CuP 284 | B-Cu80AgP-645/800 | BCuP-5 | 645 - 800 | 1193 - 1472 | surface meets the requirements for laser processing | laser brazing |
| A 3015 F | CuP 284 | B-Cu80AgP-645/800 | BCuP-5 | 645 - 800 | 1193 - 1472 | Thin fluid copper-phosphorus alloy with high silver content and high ductility,even at low temperatures | gap brazing of copper and copper |
| A 3015 FS | CuP 284 | B-Cu80AgP-645/800 | BCuP-5 | 645 - 800 | 1193 - 1472 | surface meets the requirements for laser processing | laser brazing |